Dish DISH 500 / DISH 1000 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Attention and Warning Symbols
You must be aware of safety when you install and use this system. This guide provides various procedures.
If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or
property. Some other procedures require special attention.
Marks a procedure where the following may happen:
• Personal injury or death may occur.
• Equipment or property may be damaged.
Marks the following issues:
• Important operation or maintenance instructions follow.
• Special attention is required.
Important Safety Instructions
You must keep safety in mind when you install and use the DISH 500+ and DISH 1000+ antenna
assembly. Refer to the safety instructions in the installation instructions that came with your system. In this
guide, the following notes tell you when you need to pay special attention:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
Keep the following in mind when you install the DISH 500+ and DISH 1000+ antenna assembly:
• Before you drill any holes in your building, make sure there are no wires or pipes near the holes.
• Install the equipment in accordance with the local building and electrical codes. If you are not
sure, call a licensed building inspector or electrician for help.
• Never install the antenna assembly near power lines.
• Don’tinstalltheantennaassemblyoncompositematerialssuchasstrand,chip,ber,orparticle
board unless the fastener attaches securely to a wall stud, rafter, or other foundation material
beneath the surface.
Note to Satellite TV System Installer: This reminder is provided to call the antenna installers
attention to the National Electrical Code® (NEC) which provides guidelines for proper bonding and
grounding of antennas and their associated cabling.
Page view 1
1 2 3 4 5 6 7 ... 27 28

Comments to this Manuals

No comments